3/31/2024 0 Comments P5k e![]() The BIOS automatically enables the high-speed USB 2.0 controller, but if the computer fails to detect a USB 1.0 or USB 1.1 device, change USB 2.0 Controller Mode to “FullSpeed” to switch the USB controller to compatibility mode. The USB Configuration menu on the Advanced tab enables you to change how the universal serial bus ports function on the ASUS P5K-E motherboard. For the best performance, the first boot device should be the floppy drive, the second, the optical drive, and the third, the hard drive. Use the Boot menu to configure the boot sequence for each device. Select “IDE” to enable older operating systems like Windows XP to detect the hard drive select “AHCI” to enable hot swapping and native command queuing in Windows Vista and Windows 7 select “RAID” to set up a RAID 0, RAID 1, RAID 5 or RAID 10 array on multiple hard drives. You can change the SATA mode on the SATA Configuration screen, accessible from the Main tab. The ASUS P5K-E uses three different modes for serial advanced technology attachment hard drives. ![]() Which settings you should use in the BIOS depends on your computer’s hardware and operating system. The BIOS has its own default values, but you can alter these settings to change how the computer behaves. The basic input/output system, stored in a read-only memory chip on the ASUS P5K-E, is responsible for configuring the devices connected to the motherboard. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |